Wednesday, January 29, 2014

Make A Burlap Valentine Heart To Hang In Your Home

 Are you staying warm where you are?  I.  Am.  Over.  This.  Weather.  Bring on springtime.  I want flowers and green grass and warm sunshine.  I don't want to wear a coat, a scarf, or gloves any more.  Done.  Through.

Yesterday, I worked on this Valentine heart wreath made from burlap.  I happen to love burlap even though it sheds a lot and the little fibers get up your nose (which is really fun with a cold).  Burlap is inexpensive and relatively easy to work with.  Even though this burlap looks very red, it is actually a little darker.  Reds just seem to be hard to photograph.

I found some red burlap at Wally World a couple of weeks ago and bought two yards.  Red is not always available, so I always buy extra when I find it.  I seem to use a lot of it for some reason - perhaps because I like red and it is an accent color in my home.

I have this old piece of wood that hangs on the wall in our dining area that I use as sort of a gallery to keep from putting lots of holes in the wall.  It works out very well, and is an interesting art piece in and of itself.  It must have been part of a door at one time.  We found it at our favorite second hand store here in Nashville.  I like to hang interesting things on it.  This wreath is the perfect piece and may stay there after Valentine's Day - at least until spring.

For the wreath form, I used some 16 gauge wire that I bought at Christmas time to make the coiled wreath that you can find on my blog.  It is the one filled with yarn balls and Christmas ornaments.  This wire is sturdy and easy to shape at the same time.  You could use a coat hanger, but the heavier ones can be hard to shape and those awful white ones may be too flimsy.  I found this wire at Home Depot.  I just sort of formed the size I wanted and cut the wire and twisted the bottom.  The wire shape is about 14 x 14.
The form does not have to be perfectly shaped because you are going to cover it with the burlap ties.  Don't fret if the wire is wavy.

It is easy to cut strait lines in burlap because of the loose weave.  You simply pull a thread all the way across and cut in the open space that is left.
Pull a thread and try to pull it all the way across without breaking.  Go slow and good luck.  If the thread breaks, just simply find the break, pull out the lose end and go from there until you get all the way across the width of the burlap.  This burlap is 45 inches wide.
See the open space?  Just cut all the way across and you have a nice straight strip.  Make your strips the width that you want.  I made mine 1.5 inches.  That width works nicely with this project and is not too hard to tie.  If you make thinner strips, the burlap sometimes comes apart when tying and wider ones are hard to tie.  Guess how I know that?

I used about a half yard of fabric for this wreath.  I cut strips 4 at a time and then cut the strips into about 7 inch lengths.  These are easy to tie and not too long.  If you need more strips, cut a few more.  This way, you don't waste a lot of the burlap if you don't use it.

Take one of the 7 inch strips and tie an overhand knot around the wire form.  If you are not familiar with knots, that is just like you would tie the beginning of a shoe lace.  One tie is good and it will hold in place on the wire.  Push the ties as close together as you can.  Just keep filling in around the form, turning your knots in different directions so the wreath will look full when finished.  That's all you do.  Simple as can be.


This wreath should probably be an indoor wreath unless your door is covered by a roof that would protect it from snow and rain.  Otherwise, you may have a very sad and limp wreath.  That's just FYI.

This wreath is so cheerful and it adds a lot of color and texture to the room.  It could be made out of any color burlap or any shape for that matter.  It doesn't have to be just for Valentine's day.  I may leave this one up for a while.   I can remove the little banner below it and it is just a pretty wreath.

You could make this and use felt, ribbon, or fabric.  It would cost more, and make take more strips of ribbon or fabric, but would be just as pretty.  Your choice.  If you have scraps available, use those by all means.

You could also make these wreaths in different sizes, even quite small for gift giving.  As long as you can make a heart shape out of the wire, you can cover it with the burlap.

Add some color and whimsy to your home during these dull, gloomy winter days.  Even if you are not a big Valentine's fan, how could this beautiful heart not cheer up a room?   Have fun with this project.  I sure did.  It  only took about an hour to complete.  Easy.  Peasy.

Everyday Donna

Things to Remember:

Without Valentine's Day, February would be...well, January.  Jim Gaffigan